topic Re: netraid jumpers in Disk Enclosures

netraid jumpers

chris_535 — Tue, 23 Mar 2004 19:46:43 GMT

Hello i have a netraid 3si and i`m trying to flash the firmware, it says in the manual i need to short out pins 2-3 of jumper J5. Does anyone have the jumper diagram.

Thanks

Chris

Re: netraid jumpers

Michael Schulte zur Sur — Wed, 24 Mar 2004 11:43:17 GMT

Hi,

couldn't find it either. Can't you find the jumper J5? Usually they are marked on the board and the pin 1 too.

greetings,

Michael

Re: netraid jumpers

chris_535 — Wed, 24 Mar 2004 13:20:32 GMT

i can find the pins all of them are open they look like
.....
......

They are to the ltft of the batery but carnt make out the No 1 pin.

Re: netraid jumpers

Michael Schulte zur Sur — Wed, 24 Mar 2004 14:32:58 GMT

Hi,

they should be numbered that way
12345
so look carefully, if there is not a tiny little 1 to the left of the pins.

greetings,

Michael

Re: netraid jumpers

e4services — Thu, 25 Mar 2004 09:58:29 GMT

Email HP support and see if you can get a board layout diagram, since it does not seem to be available anywhere.

Re: netraid jumpers

amhakassa — Thu, 25 Mar 2004 12:54:22 GMT

Hi Chris,

J5 will be right below the internal SCSI Channel 0. It is located besides of J14

Regards
Amha Kassa

Re: netraid jumpers

chris_535 — Thu, 25 Mar 2004 14:39:33 GMT

Ive found J5 but need a pin diagram so i know what pins to short to flash the firmware