https://community.hpe.com/t5/disk-enclosures/hp-diskarray/m-p/3236978#M11632 I forgot one additional question... What is the serial cable pinout?<BR /><BR />Thank you for your information and time<BR />David Thu, 01 Apr 2004 10:48:22 GMT David Gwin 2004-04-01T10:48:22Z https://community.hpe.com/t5/disk-enclosures/hp-diskarray/m-p/3236977#M11631 I recently got a system (HPK220 w/ HPUX 10.20) with a 20 drive disk array (I believe it to be a A3232A). The disk array is giving me some fits. The service light comes on and the system is not booting and haults when checking the volume group. I know that I can connect directly to the disk array to configure/setup.<BR /><BR />My question... Where can I find information as to what the default setting are on the serial port for the disk array? What would be a good guess as to the connection settings? Thu, 01 Apr 2004 10:43:04 GMT https://community.hpe.com/t5/disk-enclosures/hp-diskarray/m-p/3236977#M11631 David Gwin 2004-04-01T10:43:04Z https://community.hpe.com/t5/disk-enclosures/hp-diskarray/m-p/3236978#M11632 I forgot one additional question... What is the serial cable pinout?<BR /><BR />Thank you for your information and time<BR />David Thu, 01 Apr 2004 10:48:22 GMT https://community.hpe.com/t5/disk-enclosures/hp-diskarray/m-p/3236978#M11632 David Gwin 2004-04-01T10:48:22Z