https://community.hpe.com/t5/disk-enclosures/replacing-failed-disk-in-va7100/m-p/3242740#M11744 Ryan<BR /><BR />It is very easy.<BR /><BR />Verify using Command View that the status of the VA is OK. <BR />The green LED next to the power button must be on and the amber LED must be off!<BR /><BR />Then pull the failed disk, wait 15 sec then remove it. Wait some 30 sec and insert the new drive.<BR />The VA then automatically starts redistributing data to all drives.<BR />Verify the LEDs and status in Command view.<BR /><BR />For refernce have alook at:<BR /><A href="http://h20000.www2.hp.com/bizsupport/CoreRedirect.jsp?targetPage=http%3A%2F%2Fh200001.www2.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Flpg29322%2Flpg29322.pdf" target="_blank">http://h20000.www2.hp.com/bizsupport/CoreRedirect.jsp?targetPage=http%3A%2F%2Fh200001.www2.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Flpg29322%2Flpg29322.pdf</A> <BR /> <BR />and read staring on page 98 in this manual:<BR /><A href="http://h200002.www2.hp.com/bc/docs/support/SupportManual/c00088801/c00088801.pdf" target="_blank">http://h200002.www2.hp.com/bc/docs/support/SupportManual/c00088801/c00088801.pdf</A> <BR /><BR />Cheers<BR />Peter Thu, 08 Apr 2004 06:52:12 GMT Peter Mattei 2004-04-08T06:52:12Z https://community.hpe.com/t5/disk-enclosures/replacing-failed-disk-in-va7100/m-p/3242739#M11743 Hi,<BR /><BR />We have a VA7100 with a failded drive in it. We have a good spare and we want to swap it. It is attached to 989 box running MPE. What is the procedure for doing this? Any help would be appreciated.<BR /><BR />Ryan Wed, 07 Apr 2004 11:50:31 GMT https://community.hpe.com/t5/disk-enclosures/replacing-failed-disk-in-va7100/m-p/3242739#M11743 Ryan_151 2004-04-07T11:50:31Z https://community.hpe.com/t5/disk-enclosures/replacing-failed-disk-in-va7100/m-p/3242740#M11744 Ryan<BR /><BR />It is very easy.<BR /><BR />Verify using Command View that the status of the VA is OK. <BR />The green LED next to the power button must be on and the amber LED must be off!<BR /><BR />Then pull the failed disk, wait 15 sec then remove it. Wait some 30 sec and insert the new drive.<BR />The VA then automatically starts redistributing data to all drives.<BR />Verify the LEDs and status in Command view.<BR /><BR />For refernce have alook at:<BR /><A href="http://h20000.www2.hp.com/bizsupport/CoreRedirect.jsp?targetPage=http%3A%2F%2Fh200001.www2.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Flpg29322%2Flpg29322.pdf" target="_blank">http://h20000.www2.hp.com/bizsupport/CoreRedirect.jsp?targetPage=http%3A%2F%2Fh200001.www2.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Flpg29322%2Flpg29322.pdf</A> <BR /> <BR />and read staring on page 98 in this manual:<BR /><A href="http://h200002.www2.hp.com/bc/docs/support/SupportManual/c00088801/c00088801.pdf" target="_blank">http://h200002.www2.hp.com/bc/docs/support/SupportManual/c00088801/c00088801.pdf</A> <BR /><BR />Cheers<BR />Peter Thu, 08 Apr 2004 06:52:12 GMT https://community.hpe.com/t5/disk-enclosures/replacing-failed-disk-in-va7100/m-p/3242740#M11744 Peter Mattei 2004-04-08T06:52:12Z