https://community.hpe.com/t5/disk-enclosures/can-t-see-logical-drive-after-adding-array/m-p/3254084#M11894 Hi,<BR /> Wasn't sure if I should have added this to Storage or Servers....<BR /><BR />Anyhow, we have two ML370's running MS Clustering connected via Fiber Hub to a RA4100. I added another array in the RA4100 using SmartStart and later tried ACU and successfully setup a logical drive for the new space. In NT, however, Disk Manager says that I am missing the disk or configuration for the logical drive.<BR /> Also, we added drives to the first array 2 years ago without any problems. Any ideas?? Tue, 20 Apr 2004 14:39:58 GMT Ron Rhinehart 2004-04-20T14:39:58Z https://community.hpe.com/t5/disk-enclosures/can-t-see-logical-drive-after-adding-array/m-p/3254084#M11894 Hi,<BR /> Wasn't sure if I should have added this to Storage or Servers....<BR /><BR />Anyhow, we have two ML370's running MS Clustering connected via Fiber Hub to a RA4100. I added another array in the RA4100 using SmartStart and later tried ACU and successfully setup a logical drive for the new space. In NT, however, Disk Manager says that I am missing the disk or configuration for the logical drive.<BR /> Also, we added drives to the first array 2 years ago without any problems. Any ideas?? Tue, 20 Apr 2004 14:39:58 GMT https://community.hpe.com/t5/disk-enclosures/can-t-see-logical-drive-after-adding-array/m-p/3254084#M11894 Ron Rhinehart 2004-04-20T14:39:58Z