https://community.hpe.com/t5/disk-enclosures/va7410/m-p/3257589#M11907 Hello<BR />I would install a command view 1.07 in HP-UX 11.00. Can it work with in vA7410 with A100 firmware? or is absolutely necessary upgrade it in A120?<BR />Bye and thanks<BR /> Fri, 23 Apr 2004 08:24:25 GMT HDgio 2004-04-23T08:24:25Z https://community.hpe.com/t5/disk-enclosures/va7410/m-p/3257589#M11907 Hello<BR />I would install a command view 1.07 in HP-UX 11.00. Can it work with in vA7410 with A100 firmware? or is absolutely necessary upgrade it in A120?<BR />Bye and thanks<BR /> Fri, 23 Apr 2004 08:24:25 GMT https://community.hpe.com/t5/disk-enclosures/va7410/m-p/3257589#M11907 HDgio 2004-04-23T08:24:25Z https://community.hpe.com/t5/disk-enclosures/va7410/m-p/3257590#M11908 Hi,<BR /><BR />A100 is the *minimum* firmware required, ie. your config should work with that fw.<BR /><BR />However, upgrading to A120 is strongly recommended.<BR /><BR />So you can decide depending on your priorities... <BR /><BR />Regards,<BR />Bernhard Fri, 23 Apr 2004 08:49:42 GMT https://community.hpe.com/t5/disk-enclosures/va7410/m-p/3257590#M11908 Bernhard Mueller 2004-04-23T08:49:42Z https://community.hpe.com/t5/disk-enclosures/va7410/m-p/3257591#M11909 thanks <BR />I forgot to ask if VA with A100 can work with 11i Fri, 23 Apr 2004 08:56:24 GMT https://community.hpe.com/t5/disk-enclosures/va7410/m-p/3257591#M11909 HDgio 2004-04-23T08:56:24Z https://community.hpe.com/t5/disk-enclosures/va7410/m-p/3257592#M11910 Hi,<BR /><BR />yes it supports HP-UX 11.11 as well as 11.00<BR /><BR />Regards,<BR />Bernhard Fri, 23 Apr 2004 09:35:42 GMT https://community.hpe.com/t5/disk-enclosures/va7410/m-p/3257592#M11910 Bernhard Mueller 2004-04-23T09:35:42Z