topic Re: Va 7410 in Disk Enclosures

Va 7410

Bona_1 — Tue, 27 Apr 2004 02:34:00 GMT

Strange problem with my VA. I can access the luns that I configured, they are mounted and working well. However, I cannot administer the VA using commandview (launcher). I have rebooted both the server and the VA... so avail. Please assist.

Bona

Re: Va 7410

Rgomes — Tue, 27 Apr 2004 04:12:40 GMT

Hi,

1)Can you administer the VA by 'cvui'?
#cvui << On a local host
#cvui -h << From a remote client
#cvui -h {array_id} << From a remote client - connects to
specified array

2)Are you running launcher as a regular user? CVSDM 1.07 has access security which I believe 'secadmin'.

3)You can also try from web browser:
http://:4096/Launcher.html
http://:4096/cmdviewVA.html?:

best regards,
Richard

Re: Va 7410

Karthik S S — Tue, 27 Apr 2004 06:14:52 GMT

Also you should have an entry for the hostname/IP from where you are running the Launcher in the following file,

/etc/opt/sanmgr/hostagent/config/access.dat

does armdsp shows you the array ID? try running armdiscover and relaunch the GUI.

-Karthik S S

Re: Va 7410

kirit_2 — Wed, 28 Apr 2004 05:30:11 GMT

Have you upgraded your command view SDM ? If yes and its 1.07 you must need to do secadmin commands - which is there in cvsdm 1.07 upgrade guide.

- if you faced problem recently than - have you changed your server root password - if yes - try old password - it will work.

Re: Va 7410

Arend Lensen — Wed, 28 Apr 2004 06:52:57 GMT

Or disable cvsdm security in:
opt-sanmgr-commandview-server-config-PanConfigParams.txt