https://community.hpe.com/t5/disk-enclosures/error-flashing/m-p/2492169#M1201 We have tested with SA5300 in PIC slot 7 and the original NC in PIC slot 5. The system is configured with dual III eon 933 MHz and 2 I 512 BB in slot 1 and 5 and the original 128 BB in slot 2. The system is configured with the extra Drive Cage. Disks are 2 I 18 GB 10K in 1:0 and 2:0, 3 x 36 GB 10K in 1:1, 1:2 and 2:1. <BR />And think thats about all it?s configured with. Sun, 18 Feb 2001 00:00:00 GMT Ayman Altounji 2001-02-18T00:00:00Z https://community.hpe.com/t5/disk-enclosures/error-flashing/m-p/2492165#M1197 I got a error while update the Rom from 1.28 to 1.62, the error is "Flash unsuccsessfull error Bh", but after a reboot the Controller shows the new Version 1.62 and all diag's are ok. <BR />i tried this on 5 different Maschines of Type ML530 with ROM 11-08-2000. Sun, 11 Feb 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/error-flashing/m-p/2492165#M1197 Ayman Altounji 2001-02-11T00:00:00Z https://community.hpe.com/t5/disk-enclosures/error-flashing/m-p/2492166#M1198 If you upgrade the firmware of 5300 controller installed in an ML530, you will recieve an error at the end of the upgrade process <BR /> <BR />Warning: Flash unsuccessful; BH <BR />Compaq Smart 5300 controller Slot X <BR /> <BR />When you reboot you will find that the array was updated and working fine, with no problems. I think this maybe a rom related issue on the 530 not sure if Compaq will have another rom for server to resolve this or the array controller. NOTE THAT THE FLASH UGRADE IS GOOD AND ALL WILL WORK FINE. Mon, 12 Feb 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/error-flashing/m-p/2492166#M1198 Ayman Altounji 2001-02-12T00:00:00Z https://community.hpe.com/t5/disk-enclosures/error-flashing/m-p/2492167#M1199 Have anyone heard anything new from Compaq support about this issue? We have had the same issue on the ML530 with both the new and old BIOS (4.06A, 4,05A). Thu, 15 Feb 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/error-flashing/m-p/2492167#M1199 Ayman Altounji 2001-02-15T00:00:00Z https://community.hpe.com/t5/disk-enclosures/error-flashing/m-p/2492168#M1200 Don't have anything on this (yet)... What other cards/options do you have installed in these systems? Fri, 16 Feb 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/error-flashing/m-p/2492168#M1200 Ayman Altounji 2001-02-16T00:00:00Z https://community.hpe.com/t5/disk-enclosures/error-flashing/m-p/2492169#M1201 We have tested with SA5300 in PIC slot 7 and the original NC in PIC slot 5. The system is configured with dual III eon 933 MHz and 2 I 512 BB in slot 1 and 5 and the original 128 BB in slot 2. The system is configured with the extra Drive Cage. Disks are 2 I 18 GB 10K in 1:0 and 2:0, 3 x 36 GB 10K in 1:1, 1:2 and 2:1. <BR />And think thats about all it?s configured with. Sun, 18 Feb 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/error-flashing/m-p/2492169#M1201 Ayman Altounji 2001-02-18T00:00:00Z https://community.hpe.com/t5/disk-enclosures/error-flashing/m-p/2492170#M1202 Hi, <BR /> <BR />Exactly the same problem occurs with 2 SA5300 on a Ml530 patched with the last firmware... Same observation with the diag's and version showed by the smart array after the flash failure... <BR /> <BR />Is it just a cosmetic problem, a way to rise your adrenaline blood level and nothing else? <BR /> <BR />Kind regards <BR /> <BR />Philippe Tue, 20 Feb 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/error-flashing/m-p/2492170#M1202 Ayman Altounji 2001-02-20T00:00:00Z