https://community.hpe.com/t5/disk-enclosures/5i-controller/m-p/3266967#M12019 How can I disable the 5i controller so the<BR />Adaptec controller that I have in DL380-G2<BR />will be the controller that my hard drive will boot from . Thanks Tue, 04 May 2004 09:58:25 GMT Ala_3 2004-05-04T09:58:25Z https://community.hpe.com/t5/disk-enclosures/5i-controller/m-p/3266967#M12019 How can I disable the 5i controller so the<BR />Adaptec controller that I have in DL380-G2<BR />will be the controller that my hard drive will boot from . Thanks Tue, 04 May 2004 09:58:25 GMT https://community.hpe.com/t5/disk-enclosures/5i-controller/m-p/3266967#M12019 Ala_3 2004-05-04T09:58:25Z https://community.hpe.com/t5/disk-enclosures/5i-controller/m-p/3266968#M12020 You can disable it from bios. (f9 prompt)<BR />You can also set the adaptec controller in bios to have a higher boot priority than the 5i if you want. Wed, 05 May 2004 10:12:36 GMT https://community.hpe.com/t5/disk-enclosures/5i-controller/m-p/3266968#M12020 Chanler Childs 2004-05-05T10:12:36Z https://community.hpe.com/t5/disk-enclosures/5i-controller/m-p/3266969#M12021 Thank you very much. Wed, 05 May 2004 10:51:57 GMT https://community.hpe.com/t5/disk-enclosures/5i-controller/m-p/3266969#M12021 Ala_3 2004-05-05T10:51:57Z