https://community.hpe.com/t5/disk-enclosures/fc60-lun-problem/m-p/3273687#M12110 We have an FC60 that had 3 LUNs configured on it. We had a power outage (even the UPS ran out of power) and now I'm rebuilding things. A couple of the disks in one of the LUNs died and so I had to rebuild that LUN and restore from backups.<BR /><BR />However, I still have 5 disks that were assigned to a LUN that show as belonging to a LUN, but the LUN doesn't show up in the amdsp command.<BR /><BR />How can I force these disks to join a new LUN? I get an error whenever I try to create a new LUN with these disks.<BR /><BR />I've attached some of the output from my amdsp commands.<BR /><BR />Thanks for your help,<BR /><BR />Marty<BR /><BR /><BR /><BR /> Tue, 11 May 2004 17:37:13 GMT Marty Hoff 2004-05-11T17:37:13Z https://community.hpe.com/t5/disk-enclosures/fc60-lun-problem/m-p/3273687#M12110 We have an FC60 that had 3 LUNs configured on it. We had a power outage (even the UPS ran out of power) and now I'm rebuilding things. A couple of the disks in one of the LUNs died and so I had to rebuild that LUN and restore from backups.<BR /><BR />However, I still have 5 disks that were assigned to a LUN that show as belonging to a LUN, but the LUN doesn't show up in the amdsp command.<BR /><BR />How can I force these disks to join a new LUN? I get an error whenever I try to create a new LUN with these disks.<BR /><BR />I've attached some of the output from my amdsp commands.<BR /><BR />Thanks for your help,<BR /><BR />Marty<BR /><BR /><BR /><BR /> Tue, 11 May 2004 17:37:13 GMT https://community.hpe.com/t5/disk-enclosures/fc60-lun-problem/m-p/3273687#M12110 Marty Hoff 2004-05-11T17:37:13Z https://community.hpe.com/t5/disk-enclosures/fc60-lun-problem/m-p/3273688#M12111 Marty,<BR />The amdsp is just a fraction from the complete output and not enough to work with.<BR />Because is see the UTM on 31 i think your array is not on the latest firmware. The FC60 is not easy to troubleshoot. I would recommend you get a specialist from HP helping you with this. However if the array is empty and that strange lun 0 is the only lun on the array you might consider to do a SysWipe of the intire array. See the service manual for more details on that.<BR />Regards,<BR />Arend Thu, 13 May 2004 02:27:10 GMT https://community.hpe.com/t5/disk-enclosures/fc60-lun-problem/m-p/3273688#M12111 Arend Lensen 2004-05-13T02:27:10Z