topic Re: Modify wwn by cvcli CV1.7A CommandView XP in Disk Enclosures

Modify wwn by cvcli CV1.7A CommandView XP

Jose Ramón Rodríguez — Wed, 09 Jun 2004 06:55:47 GMT

We have a XP-512 disk array and a worktstation with CommandView XP. We access to XP-512 by CommandView XP using a browser or a command line "cvcli".
We want to change the wwn using the cvcli command "modify wwn , , " (modify wwn CL1-F, ser1_td1, 50060B00001161F5) but we get the next message "WWN should be a hex string".
We get this wwn with "tdutil /dev/td1" command.
If we use "0x50060B00001161F5" the same message appears.

Do you know how to specify the ? or is a bug of cvcli CV1.7A?

Thanks in advance.

Re: Modify wwn by cvcli CV1.7A CommandView XP

Shaikh Imran — Wed, 09 Jun 2004 07:27:47 GMT

hi,
Maybe silly But just confirm me..
You are using ..
modify wwn CL1-F, ser1_td1, 50060B00001161F5
Can you try w/o comma or is it you have already tried w/o comma..
modify wwn CL1-F ser1_td1 50060B00001161F5
FYI WWN should be 16 digit hex number only and 50060B00001161F5 is a 16 digit HEx number.

Regards,

Re: Modify wwn by cvcli CV1.7A CommandView XP

Jose Ramón Rodríguez — Wed, 09 Jun 2004 07:51:11 GMT

Thanks Shaikh.

I've only tried with ..
modify wwn CL1-F, ser1_td1, 50060B00001161F5

when I can will try with ..
modify wwn CL1-F ser1_td1 50060B00001161F5

and will comment the result.

Re: Modify wwn by cvcli CV1.7A CommandView XP

Jose Ramón Rodríguez — Wed, 26 Jan 2005 06:48:05 GMT

Hey,
I just have changed the wwn, but the command sintax isnÂ´t "modify wwn , , " like appear in the hp StorageWorks command view xp Reference Guide.
The sintax is: "modify wwn , , ".

Thank