topic Burning Test on Disk System 2405 in Disk Enclosures

Burning Test on Disk System 2405

Leon Shen — Thu, 10 Jun 2004 19:43:31 GMT

Hi All,

I just would like know is any doucment can tell me how to do burning Test on DS2405. or Just power on the Disk System and let it run 24-48 hours.

Best regards
Leon

Re: Burning Test on Disk System 2405

Steven E. Protter — Thu, 10 Jun 2004 19:51:07 GMT

I would power up the system, install an OS on it, including all disks.

Then put in some jobs from a working system and a cron schedule. If you have online JFS take the time to defragment all disks.

Run 48 hours and check itrc the next morning.

It will be burned quite nicely by then.

I also think these servers are burned at the factory. Could be wrong about that.

SEP

Re: Burning Test on Disk System 2405

Yew Lee — Sun, 13 Jun 2004 22:06:14 GMT

Install OnlineDiag and use the MSTM disk exercise tool. You can select either a read only or read-write test. The length of disk test can be set at Options->Tool Options->Exercise. Hope this helps.