https://community.hpe.com/t5/disk-enclosures/event-id-1065/m-p/3326788#M12845 Mark:<BR /><BR />Check the controller battery charge status. This could be the cause. Thu, 08 Jul 2004 14:27:06 GMT JohnWRuffo 2004-07-08T14:27:06Z https://community.hpe.com/t5/disk-enclosures/event-id-1065/m-p/3326787#M12844 One of the four ML Proliant 570's in house here is registering the warning:<BR /><BR />Drive Array Accelerator Status Change. The array accelerator board attached to the array controller in slot 1 has a new status of 4.<BR />(Accelerator status values: 1=other, 2=notConfigured, 3=enabled, 4=tmpDisabled, 5=permDisabled)<BR /> [SNMP TRAP: 3025 in CPQIDA.MIB] <BR /><BR />Can anyone identify the cause and the severity of the issue?<BR /><BR />TIA,<BR /><BR />Mark<BR /> Thu, 08 Jul 2004 13:50:18 GMT https://community.hpe.com/t5/disk-enclosures/event-id-1065/m-p/3326787#M12844 Mark Weller 2004-07-08T13:50:18Z https://community.hpe.com/t5/disk-enclosures/event-id-1065/m-p/3326788#M12845 Mark:<BR /><BR />Check the controller battery charge status. This could be the cause. Thu, 08 Jul 2004 14:27:06 GMT https://community.hpe.com/t5/disk-enclosures/event-id-1065/m-p/3326788#M12845 JohnWRuffo 2004-07-08T14:27:06Z https://community.hpe.com/t5/disk-enclosures/event-id-1065/m-p/3326789#M12846 Thanks for the reply, we appear to have an intermittently failing battery. Mon, 12 Jul 2004 08:12:29 GMT https://community.hpe.com/t5/disk-enclosures/event-id-1065/m-p/3326789#M12846 Mark Weller 2004-07-12T08:12:29Z