https://community.hpe.com/t5/disk-enclosures/hp-va7410-disk-array-configuration/m-p/3361997#M13340 We have 2 x VA7410 disk arrays. 1 primary and it's mirror.<BR />Within the current configuration there is an unused 25GB LUN <BR />with 4 paths leading to each array.<BR />We would like to split this LUN (LUN 7) into 2 LUNS one of 10GB <BR />and the other 15GB.<BR />What do we need to do to get to this configuration ? Fri, 20 Aug 2004 09:47:24 GMT Unix Sysadm 2004-08-20T09:47:24Z https://community.hpe.com/t5/disk-enclosures/hp-va7410-disk-array-configuration/m-p/3361997#M13340 We have 2 x VA7410 disk arrays. 1 primary and it's mirror.<BR />Within the current configuration there is an unused 25GB LUN <BR />with 4 paths leading to each array.<BR />We would like to split this LUN (LUN 7) into 2 LUNS one of 10GB <BR />and the other 15GB.<BR />What do we need to do to get to this configuration ? Fri, 20 Aug 2004 09:47:24 GMT https://community.hpe.com/t5/disk-enclosures/hp-va7410-disk-array-configuration/m-p/3361997#M13340 Unix Sysadm 2004-08-20T09:47:24Z https://community.hpe.com/t5/disk-enclosures/hp-va7410-disk-array-configuration/m-p/3361998#M13341 Hi,<BR /><BR />you have to remove LUN7 and create two new LUNS<BR /><BR />new LUNS you can add and del by armcfg command:<BR /><BR />ex. add:<BR /><BR />armcfg -L 7 -a 10000 -g 1 alias_of_va_array<BR /><BR />-g - redundancy group number<BR /><BR /><BR /> Fri, 20 Aug 2004 15:24:21 GMT https://community.hpe.com/t5/disk-enclosures/hp-va7410-disk-array-configuration/m-p/3361998#M13341 Slawomir Gora 2004-08-20T15:24:21Z