https://community.hpe.com/t5/disk-enclosures/command-view-error/m-p/3382291#M13652 I had a Command View 1.07 installed on a L2000 connected to a VA7410 that perfectly worked, after the move in the other subnet,and modify <BR />the fileses with the information of the host,<BR /> the command launcher fails. <BR />" Internal Error 106. Unable to launch management software verify that software is installed correctly"<BR />I would also have thought of reinstall the Commnad View 1.07 <BR />or to install the 1.08 but where I can take the license that is installed ?<BR />Or it is not necessary ? Mon, 20 Sep 2004 07:44:02 GMT HDgio 2004-09-20T07:44:02Z https://community.hpe.com/t5/disk-enclosures/command-view-error/m-p/3382291#M13652 I had a Command View 1.07 installed on a L2000 connected to a VA7410 that perfectly worked, after the move in the other subnet,and modify <BR />the fileses with the information of the host,<BR /> the command launcher fails. <BR />" Internal Error 106. Unable to launch management software verify that software is installed correctly"<BR />I would also have thought of reinstall the Commnad View 1.07 <BR />or to install the 1.08 but where I can take the license that is installed ?<BR />Or it is not necessary ? Mon, 20 Sep 2004 07:44:02 GMT https://community.hpe.com/t5/disk-enclosures/command-view-error/m-p/3382291#M13652 HDgio 2004-09-20T07:44:02Z