topic Re: Add Hosts in Command View in Disk Enclosures

Add Hosts in Command View

Howard_24 — Thu, 23 Sep 2004 19:18:29 GMT

Has anyone run into an issue when you add a host under Command View EVA and you enter a IP address it fails with a message down in the left hand corner, error on page. It then fails to add the host. If I enter obtain address with DHCP it will add the host. I'm running Command View 3.2.0.16 and it's an EVA5000 at 3014.

Thanks,

Howard

Re: Add Hosts in Command View

florence mathon lermusi — Tue, 28 Sep 2004 09:02:48 GMT

Hi Howard,

as i know, the ip you enter in command view is just informal, your problem is probably coming from something else. Did you try to had other host, or did you retry ?

Re: Add Hosts in Command View

florence mathon lermusi — Tue, 28 Sep 2004 09:04:22 GMT

what is your VCS release on your EVA ?

Re: Add Hosts in Command View

Uwe Zessin — Tue, 28 Sep 2004 10:26:56 GMT

He wrote it is 3.014. (Sorry, can't help with the problem)

Re: Add Hosts in Command View

florence mathon lermusi — Wed, 29 Sep 2004 03:30:47 GMT

sorry for that...

i'm not sure that VCS 3.014 supports command view 3.2 ...

this can be the source of the pb

Re: Add Hosts in Command View

Uwe Zessin — Wed, 29 Sep 2004 03:36:56 GMT

But CV-EVA V3.2 supports VCS V3.014.

Re: Add Hosts in Command View

florence mathon lermusi — Fri, 01 Oct 2004 07:28:44 GMT

yes that's right...