https://community.hpe.com/t5/disk-enclosures/smart-array-532/m-p/3396150#M13845 My SA-532 died during a flash upgrade :-(<BR />It's in a ML350, which doesn't find the controller during boot, so I can't access it to flash it again.<BR />Any ideas?<BR /><BR />If I replace the controller with another SA-532 will it recognize the RAID5 array that is/was configured? Fri, 08 Oct 2004 05:07:11 GMT Søren Fisker 2004-10-08T05:07:11Z https://community.hpe.com/t5/disk-enclosures/smart-array-532/m-p/3396150#M13845 My SA-532 died during a flash upgrade :-(<BR />It's in a ML350, which doesn't find the controller during boot, so I can't access it to flash it again.<BR />Any ideas?<BR /><BR />If I replace the controller with another SA-532 will it recognize the RAID5 array that is/was configured? Fri, 08 Oct 2004 05:07:11 GMT https://community.hpe.com/t5/disk-enclosures/smart-array-532/m-p/3396150#M13845 Søren Fisker 2004-10-08T05:07:11Z https://community.hpe.com/t5/disk-enclosures/smart-array-532/m-p/3396151#M13846 Hi,<BR /><BR />the RAID configuration info is on the disks, so another controller will recognize your array.<BR /><BR />Regards<BR />Stephen Fri, 08 Oct 2004 05:57:05 GMT https://community.hpe.com/t5/disk-enclosures/smart-array-532/m-p/3396151#M13846 Stephen Kebbell 2004-10-08T05:57:05Z