topic Re: HP Sure Store SC10 in Disk Enclosures

HP Sure Store SC10

Shawn Patterson — Fri, 02 Mar 2001 18:27:30 GMT

Hello,

I have a customer who currently has a A3511A FC Multiplexer with a Mod12 connected to it. He wants to know if he can hook up his SC10 to the multiplexer in place of the Mod12? And if so, are there any special types of cables or terminators that will be needed? I have tried to find the answer with no success. Any help would be greatly appreciated. Thanks in advance!

Re: HP Sure Store SC10

Bob Inglis — Tue, 06 Mar 2001 13:38:47 GMT

Sorry, No. (Apples and Oranges)

The fc-scsi bridge is Fast Wide Differential SCSI-2.

The SC10 is Low Voltage Differential SCSI-3

Re: HP Sure Store SC10

Bill McNAMARA_1 — Tue, 13 Mar 2001 12:17:27 GMT

But there is a Forerunner 2/1 2LVD and 1FC
that should work.
I believe its only supported with the libraries
though.

Later,
Bill

Re: HP Sure Store SC10

Bill McNAMARA_1 — Thu, 15 Mar 2001 14:58:17 GMT

Here's a pdf describing the 2/1 and the 4/1
I mentioned in the earlier post.

Later,
Bill

Re: HP Sure Store SC10

Bill McNAMARA_1 — Thu, 15 Mar 2001 15:01:29 GMT

Well the zip doesn't work so here's a link

http://www.storage.hp.com/san/scsibridges/index.html

Re: HP Sure Store SC10

Shawn Patterson — Thu, 15 Mar 2001 16:23:52 GMT

Hello again,

Re: HP Sure Store SC10

Shawn Patterson — Thu, 15 Mar 2001 16:26:28 GMT

Hello again,

Thanks for the replies gentlemen, with your help I was again to take care of my customer. Thanks again for the assistance!

Shawn