topic Re: HSZ70 controller configuration backup in Disk Enclosures

HSZ70 controller configuration backup

Rajib_1 — Wed, 17 Nov 2004 00:46:09 GMT

Hi all
How can i take the backup of configuration HSZ70 controller. In the console of controller , i'll not find any option. I can veiw all the controller details but how can i save.

Regards
Thanks in advance
Rajib

Re: HSZ70 controller configuration backup

Han Pilmeyer — Wed, 17 Nov 2004 01:42:54 GMT

This is probably posted in the wrong forum.

What's your intention with "taking a backup"?

If my memory serves me right, then I think the HSZ70 also has the "save config" possibilty to store its configuration on disk. There's only limited value in doing this however.

Usually saving the full output of a few show commands should be enough to recreate it's configuration. If you have the right tools installed, then sys_check may be able to gather this information for you too.

SWCC might be another possibility. If that is
(still) available to customers...

Re: HSZ70 controller configuration backup

Justus J. Addiss — Thu, 18 Nov 2004 08:39:37 GMT

Load the Storageworks Command Console software on a PC and save the configuration from there. It saves to an ASCII file locally on your PC. I have version 2.1 of SWCC and it's very old. I could not find it on the HP site, you may have to call support for a copy.

- Justus

Re: HSZ70 controller configuration backup

Rajib_1 — Fri, 19 Nov 2004 01:04:13 GMT

Dear All

If any body have the sw SWCC for taking care of RA7000 array box and HSZ70 controller then send it to me.

Pls send me the download links if possible..

Thanks & Regards
Rajib