https://community.hpe.com/t5/disk-enclosures/no-boot-device-found/m-p/2503123#M1462 What firmware version is on this 3000? Mon, 19 Mar 2001 00:00:00 GMT Ayman Altounji 2001-03-19T00:00:00Z https://community.hpe.com/t5/disk-enclosures/no-boot-device-found/m-p/2503122#M1461 Trying to install Windows 2000 Server on a Proliant 3000. Everything goes okay until after storage detection at which time setup replies that it has found no hard disks in my system. <BR /> <BR />I'm using SmartStart 4.8... NT4.0 Server works flawlessly, the problem only happens installing Windows 2000 (Doesn't matter whether I do a fresh install using SmartStart or try to upgrade from NT4). Fri, 09 Mar 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/no-boot-device-found/m-p/2503122#M1461 Ayman Altounji 2001-03-09T00:00:00Z https://community.hpe.com/t5/disk-enclosures/no-boot-device-found/m-p/2503123#M1462 What firmware version is on this 3000? Mon, 19 Mar 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/no-boot-device-found/m-p/2503123#M1462 Ayman Altounji 2001-03-19T00:00:00Z