https://community.hpe.com/t5/disk-enclosures/server-can-t-see-2-luns/m-p/3458654#M14846 Hi Paul,<BR />I am sorry to say that the Data on those two luns is gone. A raid5 set can only withstand the loss of one drive at a time, so unless you can get one of the drives working again, it is time to recreate the luns and restore your data.<BR /><BR />Iain Ashley Mon, 10 Jan 2005 00:58:47 GMT Iain Ashley 2005-01-10T00:58:47Z https://community.hpe.com/t5/disk-enclosures/server-can-t-see-2-luns/m-p/3458653#M14845 We have a RA8000 and server can't see 2 LUNs after a power outage suddently because of the 2 failed drives on the same RAID 5. How can I configure so that servers can access these LUNs? Thanks. Sat, 08 Jan 2005 19:04:23 GMT https://community.hpe.com/t5/disk-enclosures/server-can-t-see-2-luns/m-p/3458653#M14845 Paul_526 2005-01-08T19:04:23Z https://community.hpe.com/t5/disk-enclosures/server-can-t-see-2-luns/m-p/3458654#M14846 Hi Paul,<BR />I am sorry to say that the Data on those two luns is gone. A raid5 set can only withstand the loss of one drive at a time, so unless you can get one of the drives working again, it is time to recreate the luns and restore your data.<BR /><BR />Iain Ashley Mon, 10 Jan 2005 00:58:47 GMT https://community.hpe.com/t5/disk-enclosures/server-can-t-see-2-luns/m-p/3458654#M14846 Iain Ashley 2005-01-10T00:58:47Z