topic Re: netserver raid 12 fc in Disk Enclosures

netserver raid 12 fc

Ricardo Carvalho_1 — Thu, 20 Jan 2005 15:58:54 GMT

hi to all
i have a 3 disk level 5 raid instaled with two logical drives after 48 hours of power down becouse of a move to another room one logical drive is unknow and the other is ok what is this? anyone nows?

it was working ok since january 2002

Re: netserver raid 12 fc

Greg Carlson — Thu, 20 Jan 2005 17:13:48 GMT

Ricardo,

Did you have any errors on POST? Does ctrl-M show any drives in failed state? Does the logical drive show as unknown in ctrl-M or in the operating system.

Ciao,
Greg

Re: netserver raid 12 fc

kris rombauts — Fri, 21 Jan 2005 03:08:26 GMT

Ricardo,

not sure what happened here but if you know the details of the raid configuration of the logical drive in the RS12/FC then you can use 'Raid Assistant' in the 'FC Array Assistant Utility' and reconfigure the logical drive with the same parameters and make sure you deselect the "Init Drive' in step 3 (Logical Drive TAB) option before saving the logical drive config.
This way you only re-write the array/logical drive configuration and don't touch the data on those disks.

Hopefully this enables access to your data again.

Kris

Re: netserver raid 12 fc

Ricardo Carvalho_1 — Fri, 21 Jan 2005 08:10:38 GMT

hi Greg
its a storage external in fiber so ctrl-m i cant use but farray assistance i can it was the program used to configure it back in 2002

the problem its that the configuration is there and i have no errors, not in windows or in the farray assistance log
it start on power working for 3 or 4 minuts when it was green light one logical drive its ok the other one has the same size the same parameters but windows calls it an unknown partition. the guys who sold me the device back in 2002 didnt find any errors also just windows and the netserver controler think thats a new logical drive.....

Re: netserver raid 12 fc

kris rombauts — Fri, 21 Jan 2005 08:47:08 GMT

Ricardo,

so the logical drives are both still visisble in the RS12/FC, it looks like Windows does not see the second logical drive as a valid partitioned disk then.
Maybe some corruption occured in the file system when this was shutdown... just a guess, hard to tell.

Make sure you're on the last F/W which is here:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=62540&taskId=135&prodTypeId=329290&prodSeriesId=62538〈=en&cc=us&swEnvOID=54

Eventually try a Consistency Check :

- from the Controller View double click the
disk icon that says Raid5 above it on the
right side of the Window , under Logical
Drives.
- select "Consistency Check"
- this will take a while (depends on disk
capacity) and will attempt to repair
raid5 inconsistencies if it can find any.

If this does not help the problem is purely at the OS level and i don't see much more that can be done then reformat the second logical drive.

You can also have a look in the log file fa1cl.log which resides on the system that runs the FC Array utility, maybe their is something logged in their at the time of the shutdown and power up that explains if their has been a problem.

HTH

Kris

Re: netserver raid 12 fc

Rasheed Sonson — Fri, 21 Jan 2005 10:21:50 GMT

What version of Windows? If you have 2000 you may just need to rescan that logical disk.
Can you access the drive from your drive utils?
Look at the link for more infomation
http://support.microsoft.com/default.aspx?scid=kb;en-us;131658

Re: netserver raid 12 fc

Ricardo Carvalho_1 — Fri, 21 Jan 2005 16:47:55 GMT

hi kris
i m more in line of what you are telling i think that consistency check or logical initialise was what it did after i start power on. the device is now going to a data recover firm to try to recover data if possible when i get it back i will check the firmware version but sure its older than that you give me, i will have to wait and find something to put my backup up.
thanks a lot for your info

Re: netserver raid 12 fc

kris rombauts — Mon, 24 Jan 2005 03:14:29 GMT

Hi Ricardo,

i hope you did not performed that 'init' of the logical drive, if you did then the data is gone and their is no way to recover it, save your money for something else.

regards, Kris

Re: netserver raid 12 fc

Ricardo Carvalho_1 — Mon, 24 Jan 2005 09:10:56 GMT

Hi kris
i think it did it cos as soon as i connect the power it started working even without the pc on, so i dont know exactly what whent wrong...i just wait for it to finish and shut it down to send to repair as couldnt see my 2Âº drive just the unknown one
as for question about the os the server is 2000 adv but i think thats irrelevant cos the error was befoure power on the server ..
it can be also a manufacture defect
it appears it does it everytime power is disconected from 8 to 12 hours.....just my luck..