https://community.hpe.com/t5/disk-enclosures/help-with-eva5000-configuration/m-p/3471181#M15058 Possible? Yes, if you find out what the master controller is, but that can change over time and then you can no longer monitor / manage you storage array. Else, you cannot even initialize the system.<BR /><BR />You should at least connect one port of each controller, so that the management server (most likely the Storage Management Appliance) always have access to the system. Wed, 26 Jan 2005 03:46:23 GMT Uwe Zessin 2005-01-26T03:46:23Z https://community.hpe.com/t5/disk-enclosures/help-with-eva5000-configuration/m-p/3471180#M15057 Is it possible to use only one port of the HSV controller to connect EVA5000 to the SAN? In other word EVA5000 must be connected to the SAN use only on fibre-chanel cable. Is it possible or not? Wed, 26 Jan 2005 03:40:31 GMT https://community.hpe.com/t5/disk-enclosures/help-with-eva5000-configuration/m-p/3471180#M15057 Max Sorokin 2005-01-26T03:40:31Z https://community.hpe.com/t5/disk-enclosures/help-with-eva5000-configuration/m-p/3471181#M15058 Possible? Yes, if you find out what the master controller is, but that can change over time and then you can no longer monitor / manage you storage array. Else, you cannot even initialize the system.<BR /><BR />You should at least connect one port of each controller, so that the management server (most likely the Storage Management Appliance) always have access to the system. Wed, 26 Jan 2005 03:46:23 GMT https://community.hpe.com/t5/disk-enclosures/help-with-eva5000-configuration/m-p/3471181#M15058 Uwe Zessin 2005-01-26T03:46:23Z