topic Re: compatibility M5214 and M5314 in EVA5000 in Disk Enclosures

compatibility M5214 and M5314 in EVA5000

THISE — Thu, 27 Jan 2005 09:12:39 GMT

Hi all,

Can someone say me if the Disk enclosure M5314 is compatible with M5214.

In fact, my customer has two EVA5000 (2C6D-B) with 2 HSV110 and 6 M5214 by EVA.
My goal is to make a disk upgrade for both EVA with 24 X 146GB on each EVA.

The HP configurator SBW has only M5314 at this time.

Can you help me in this problem ?

In advance, I thank you.

Best regards,

Charles.

Re: compatibility M5214 and M5314 in EVA5000

Uwe Zessin — Thu, 27 Jan 2005 11:33:05 GMT

The M5314 comes with copper cables, but that is not a problem - just remove the SFPs from the loop switch.

Re: compatibility M5214 and M5314 in EVA5000

THISE — Fri, 28 Jan 2005 03:18:47 GMT

Many thanks for your answer, but is it possible to detail it.

Because I'm not a regular of this kind of configuration.

Do I must forsee some SFPs to connect the new M5314 to an 'old' EVA-5000 with only M5214 at initial?

In advance, I thank you for your help.

Regards,

Charles.

Re: compatibility M5214 and M5314 in EVA5000

Uwe Zessin — Fri, 28 Jan 2005 03:35:59 GMT

Hello Charles,

the M5314 comes with copper cables, not fiber. They do not use any SFPs, because the conversion from electrical to optical and back is not necessary. The cable's connector replaces the SFP.

Re: compatibility M5214 and M5314 in EVA5000

THISE — Fri, 28 Jan 2005 04:50:38 GMT

Ok, now that's right for me !

Thanks.

Charles.