topic Re: SDM license key in Disk Enclosures

SDM license key

meekrob — Thu, 24 Feb 2005 16:36:07 GMT

Hi all,

I have SDM installed in one HP-UX server and when I try to use arm... command I get this message bellow :

License Status:

The InstantOn license for this product has expired. You will need to
obtain a permanent license key in order to use this product. Please
refer to product documentation for information on obtaining a license key.

please I need to know what is the technical procedure to enter the permanent license or I need to reinstall the SDM software.and how i can get this license.

thanks

Re: SDM license key

Peter Godron — Fri, 25 Feb 2005 05:30:37 GMT

Hi,
attached document may help.

Use the search facility (manuals, documents and forums) for further information or contact HP direct.

Regards

Note: I hope your record of allocating points to only 2 out of 107 replies is not an indication of the standard of help you have received in the past ;-)

Re: SDM license key

Peter Godron — Mon, 28 Feb 2005 11:01:36 GMT

Hi,
did the document help resolve the problem.
If the problem is fixed, please identify the solution and close the thread.
Many Thanks