https://community.hpe.com/t5/disk-enclosures/configuring-raid-0-1/m-p/2510916#M1556 I am confused as to what the process is when I select 6 drives and add them to an array, then select the fault tolerance to be 0+1. Which drives are mirrored, where is the strip, and how many drives can be lost before the array fails? Take into consideration that I logically partitioned the 6 drive array into two drives. How does this affect the array for faultolerance? Thu, 29 Mar 2001 00:00:00 GMT Ayman Altounji 2001-03-29T00:00:00Z https://community.hpe.com/t5/disk-enclosures/configuring-raid-0-1/m-p/2510916#M1556 I am confused as to what the process is when I select 6 drives and add them to an array, then select the fault tolerance to be 0+1. Which drives are mirrored, where is the strip, and how many drives can be lost before the array fails? Take into consideration that I logically partitioned the 6 drive array into two drives. How does this affect the array for faultolerance? Thu, 29 Mar 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/configuring-raid-0-1/m-p/2510916#M1556 Ayman Altounji 2001-03-29T00:00:00Z