https://community.hpe.com/t5/disk-enclosures/sc10-with-full-bus-problem/m-p/3506587#M15565 Two L servers with two HBA each form a cluster with two SC10 arrays with two controllers in each. One bus HBA-CntlA-SC10-CntlB-HBA works fine but the other works unstable and logs a lot of warnings about one of array's controllers in both servers. Really stm shows a big differens in temperature given by different sensors of that controller. But the other controller of that array does not show its status at all.<BR /><BR />Does both controllers need replacement?<BR /><BR />Thnx.<BR /> Thu, 17 Mar 2005 02:52:53 GMT vladimir_1 2005-03-17T02:52:53Z https://community.hpe.com/t5/disk-enclosures/sc10-with-full-bus-problem/m-p/3506587#M15565 Two L servers with two HBA each form a cluster with two SC10 arrays with two controllers in each. One bus HBA-CntlA-SC10-CntlB-HBA works fine but the other works unstable and logs a lot of warnings about one of array's controllers in both servers. Really stm shows a big differens in temperature given by different sensors of that controller. But the other controller of that array does not show its status at all.<BR /><BR />Does both controllers need replacement?<BR /><BR />Thnx.<BR /> Thu, 17 Mar 2005 02:52:53 GMT https://community.hpe.com/t5/disk-enclosures/sc10-with-full-bus-problem/m-p/3506587#M15565 vladimir_1 2005-03-17T02:52:53Z https://community.hpe.com/t5/disk-enclosures/sc10-with-full-bus-problem/m-p/3506588#M15566 Try to change the place of the HBA, the A in B place and reverse, changing the switch configuration A for B and reverse, to check HBA sensors, if continue problem maybe come from enclouser (dust...)if not HBA sensors are working bad. Thu, 17 Mar 2005 07:06:56 GMT https://community.hpe.com/t5/disk-enclosures/sc10-with-full-bus-problem/m-p/3506588#M15566 Toni_4 2005-03-17T07:06:56Z