https://community.hpe.com/t5/disk-enclosures/help-with-sc10-connection/m-p/3513818#M15652 Hi,<BR /><BR />We want to connect SC10(single bus mode) disk system to A500 hardware. How should be the connection made? A500 has just one scsi port. SC10 has 4 scsi ports. How about the termination? Any help is appreciated.<BR /><BR />Thanks. Tue, 29 Mar 2005 19:54:00 GMT Krish_4 2005-03-29T19:54:00Z https://community.hpe.com/t5/disk-enclosures/help-with-sc10-connection/m-p/3513818#M15652 Hi,<BR /><BR />We want to connect SC10(single bus mode) disk system to A500 hardware. How should be the connection made? A500 has just one scsi port. SC10 has 4 scsi ports. How about the termination? Any help is appreciated.<BR /><BR />Thanks. Tue, 29 Mar 2005 19:54:00 GMT https://community.hpe.com/t5/disk-enclosures/help-with-sc10-connection/m-p/3513818#M15652 Krish_4 2005-03-29T19:54:00Z https://community.hpe.com/t5/disk-enclosures/help-with-sc10-connection/m-p/3513819#M15653 Hi Krish,<BR /><BR />You can connect the SCSI cable from A500 SCSI port (LVD) to one of the SCSI port on BCC A (Bus Controller Card). And the other port on BCC A with terminator. The maximum cable is 12 meters.<BR /><BR />This configuration will make a single bus mode with non-redundant features.<BR /><BR />Hope this information can help you.<BR /><BR />Cheers,<BR />Adisuria Wangsadinata<BR /> Wed, 30 Mar 2005 01:47:25 GMT https://community.hpe.com/t5/disk-enclosures/help-with-sc10-connection/m-p/3513819#M15653 Adisuria Wangsadinata_1 2005-03-30T01:47:25Z