https://community.hpe.com/t5/disk-enclosures/ml350-array-configuration-problem/m-p/3529324#M15918 Hi,<BR /><BR />I'm trying to setup two disk arrays on an ML350 server. I have tried various versions of smartstart 6.10/6.20/6.30 and 7.20 however within all of these the Array Configuration Utility fails to detect a supported array controller.<BR />I can see all the disks happily from within w2K3 so a controller is obviously working?<BR /><BR />It is apparently a :-<BR />64-bit-66MHz-Dual-Channel-Wide Ultra3 SCSI HOST BUS ADAPTER<BR /><BR />How do I setup my drive arrays?<BR /><BR />Jeff Thu, 21 Apr 2005 07:23:55 GMT Jeff Chambers_2 2005-04-21T07:23:55Z https://community.hpe.com/t5/disk-enclosures/ml350-array-configuration-problem/m-p/3529324#M15918 Hi,<BR /><BR />I'm trying to setup two disk arrays on an ML350 server. I have tried various versions of smartstart 6.10/6.20/6.30 and 7.20 however within all of these the Array Configuration Utility fails to detect a supported array controller.<BR />I can see all the disks happily from within w2K3 so a controller is obviously working?<BR /><BR />It is apparently a :-<BR />64-bit-66MHz-Dual-Channel-Wide Ultra3 SCSI HOST BUS ADAPTER<BR /><BR />How do I setup my drive arrays?<BR /><BR />Jeff Thu, 21 Apr 2005 07:23:55 GMT https://community.hpe.com/t5/disk-enclosures/ml350-array-configuration-problem/m-p/3529324#M15918 Jeff Chambers_2 2005-04-21T07:23:55Z