https://community.hpe.com/t5/disk-enclosures/va7100-cvui/m-p/3543706#M16145 Yes you have to!! Thu, 12 May 2005 23:22:23 GMT Naveej.K.A 2005-05-12T23:22:23Z https://community.hpe.com/t5/disk-enclosures/va7100-cvui/m-p/3543705#M16144 I have just moved the VA7100 connected directly to a rp5470, to connect to a brocade switch. I have installed Comand View on HP-UX, and reconfigured the zoning on the switch, and can access the VA7100 via cvui/launcher. But now I want to solely access/configure the VA7100 and EVA300 connected to the switch via the SMA, but the windows version (both v1.09) cannot see the array, even after armdiscover. Is there something I have missed? or do I need to disable the HP-UX version in order to access via Windows? Thu, 12 May 2005 15:45:24 GMT https://community.hpe.com/t5/disk-enclosures/va7100-cvui/m-p/3543705#M16144 John Dempsey 2005-05-12T15:45:24Z https://community.hpe.com/t5/disk-enclosures/va7100-cvui/m-p/3543706#M16145 Yes you have to!! Thu, 12 May 2005 23:22:23 GMT https://community.hpe.com/t5/disk-enclosures/va7100-cvui/m-p/3543706#M16145 Naveej.K.A 2005-05-12T23:22:23Z https://community.hpe.com/t5/disk-enclosures/va7100-cvui/m-p/3543707#M16146 How do I perform this task then? Fri, 13 May 2005 04:15:03 GMT https://community.hpe.com/t5/disk-enclosures/va7100-cvui/m-p/3543707#M16146 John Dempsey 2005-05-13T04:15:03Z