https://community.hpe.com/t5/disk-enclosures/force-array-rebuild/m-p/3567472#M16499 I am having the same issue. Did you find a solution? Thu, 20 Oct 2005 14:27:31 GMT Chad_87 2005-10-20T14:27:31Z https://community.hpe.com/t5/disk-enclosures/force-array-rebuild/m-p/3567471#M16498 Is it possible to force a rebuild of a logical drive if it has a current status of 6 (readyForRebuild)? Tue, 21 Jun 2005 03:20:39 GMT https://community.hpe.com/t5/disk-enclosures/force-array-rebuild/m-p/3567471#M16498 JPSealey 2005-06-21T03:20:39Z https://community.hpe.com/t5/disk-enclosures/force-array-rebuild/m-p/3567472#M16499 I am having the same issue. Did you find a solution? Thu, 20 Oct 2005 14:27:31 GMT https://community.hpe.com/t5/disk-enclosures/force-array-rebuild/m-p/3567472#M16499 Chad_87 2005-10-20T14:27:31Z https://community.hpe.com/t5/disk-enclosures/force-array-rebuild/m-p/3567473#M16500 It seems that the automatic rebuild is not done because of the lack of disk space and hot-spare is not configured as well.<BR /><BR />I guess you might have had failed disk(s). Before doing manual or rather forced rebuild you need allocate disk space to rebuild the failed disks.<BR /><BR />Just could not make out from infomation given. Which array is involved here and recent failure contributing this status?<BR /> <BR /><BR /> Thu, 20 Oct 2005 21:52:14 GMT https://community.hpe.com/t5/disk-enclosures/force-array-rebuild/m-p/3567473#M16500 Sameer_Nirmal 2005-10-20T21:52:14Z