https://community.hpe.com/t5/disk-enclosures/smart-array-642-dl380-msa30/m-p/3570995#M16596 Jose!<BR /><BR />If You are creating a new Array and You split your disks over 2 channels ( as it is in your config.) the Smart-Array Controller will allways mirror across the channels.<BR />There is no option in ACU.<BR /><BR />Hope that helps<BR />Wolfram<BR /> Mon, 27 Jun 2005 01:25:40 GMT Wolfram Eckert 2005-06-27T01:25:40Z https://community.hpe.com/t5/disk-enclosures/smart-array-642-dl380-msa30/m-p/3570994#M16595 I have a DL380 with a SA642 (2 channel = 1 internal for the internal disk an 1 external for the MSA30). I like to make a RAID 0+1 of 8 disks (4 internal disks an 4 from the MSA30).<BR />They should stripe on te 4 internal disks and so mirrored on the MAS30. So that I have a mirrored over the 2 channels. Is this possible, is there a option. Where can I find this in the documentation??<BR /><BR />Thanks Sun, 26 Jun 2005 17:03:39 GMT https://community.hpe.com/t5/disk-enclosures/smart-array-642-dl380-msa30/m-p/3570994#M16595 NXS 2005-06-26T17:03:39Z https://community.hpe.com/t5/disk-enclosures/smart-array-642-dl380-msa30/m-p/3570995#M16596 Jose!<BR /><BR />If You are creating a new Array and You split your disks over 2 channels ( as it is in your config.) the Smart-Array Controller will allways mirror across the channels.<BR />There is no option in ACU.<BR /><BR />Hope that helps<BR />Wolfram<BR /> Mon, 27 Jun 2005 01:25:40 GMT https://community.hpe.com/t5/disk-enclosures/smart-array-642-dl380-msa30/m-p/3570995#M16596 Wolfram Eckert 2005-06-27T01:25:40Z