https://community.hpe.com/t5/disk-enclosures/msa1500-linux/m-p/3590089#M17002 If they were running a san with active active controllers probably not, if you had a utility like qlogic has to take care of it. But in this case it would be a good idea for this model. Fri, 29 Jul 2005 16:12:53 GMT generic_1 2005-07-29T16:12:53Z https://community.hpe.com/t5/disk-enclosures/msa1500-linux/m-p/3590087#M17000 Hi a customer have a msa1500 running linux.<BR /><BR />He is planning add a second controller and SAN a second SAN switch , also two HBA one per each system.<BR /><BR />My question is :<BR /><BR />Is necessary install secure path software for the each system_<BR /><BR />Thank you <BR /><BR />W:S Tue, 26 Jul 2005 09:44:10 GMT https://community.hpe.com/t5/disk-enclosures/msa1500-linux/m-p/3590087#M17000 WilliamSmith11 2005-07-26T09:44:10Z https://community.hpe.com/t5/disk-enclosures/msa1500-linux/m-p/3590088#M17001 Hi William<BR /><BR /> Yes ofcourse Secure path is requiered if you are planning to do the Fail over connectivity.You talk to Hp regarding the version of Secure path required for your system.Since it depends on the linux OS version what you have.<BR /><BR />Regards<BR />S.Arunkumar<BR /><BR /><BR /> Tue, 26 Jul 2005 10:50:32 GMT https://community.hpe.com/t5/disk-enclosures/msa1500-linux/m-p/3590088#M17001 S.Arunkumar 2005-07-26T10:50:32Z https://community.hpe.com/t5/disk-enclosures/msa1500-linux/m-p/3590089#M17002 If they were running a san with active active controllers probably not, if you had a utility like qlogic has to take care of it. But in this case it would be a good idea for this model. Fri, 29 Jul 2005 16:12:53 GMT https://community.hpe.com/t5/disk-enclosures/msa1500-linux/m-p/3590089#M17002 generic_1 2005-07-29T16:12:53Z