https://community.hpe.com/t5/disk-enclosures/proliant-ml350-raid5/m-p/3631255#M17735 that would be... the Servers section... :o) Wed, 21 Sep 2005 08:51:01 GMT Steven Clementi 2005-09-21T08:51:01Z https://community.hpe.com/t5/disk-enclosures/proliant-ml350-raid5/m-p/3631253#M17733 A Proliant server is currently has RAID5 and NT 4 with two partitions C: and D: . We would like to blow away the NT installation and start fresh with 2003 configured with two partitions and I have a couple of questions:<BR /><BR /><BR />1. Can anyone provide a "general" step by step for this?<BR /><BR /><BR />2. Do I need to re-format or can I use the format option during install?<BR /><BR />3. If I start the install and have windows format the existing partition will it format a c and d drive? If not how do I get two partitions?<BR /><BR />Thanks in advance Wed, 21 Sep 2005 08:20:13 GMT https://community.hpe.com/t5/disk-enclosures/proliant-ml350-raid5/m-p/3631253#M17733 ServerHelp 2005-09-21T08:20:13Z https://community.hpe.com/t5/disk-enclosures/proliant-ml350-raid5/m-p/3631254#M17734 See my reply to your posting in the Microsoft section.<BR /><BR />Steven Wed, 21 Sep 2005 08:49:28 GMT https://community.hpe.com/t5/disk-enclosures/proliant-ml350-raid5/m-p/3631254#M17734 Steven Clementi 2005-09-21T08:49:28Z https://community.hpe.com/t5/disk-enclosures/proliant-ml350-raid5/m-p/3631255#M17735 that would be... the Servers section... :o) Wed, 21 Sep 2005 08:51:01 GMT https://community.hpe.com/t5/disk-enclosures/proliant-ml350-raid5/m-p/3631255#M17735 Steven Clementi 2005-09-21T08:51:01Z