https://community.hpe.com/t5/disk-enclosures/bootable-raid0-with-smart-array-5300/m-p/3649278#M18103 Hi (again!),<BR /><BR />I know that coz my system isn't a Proliant all thing doesn't work as it should.<BR /><BR />When you add a new array from the bios-meny (when you have pressed F8 during boot-up), you can choose from different kinds of raid etc. One of the choices avaible there is "Maximum Boot Partition" which I guess makes my drive bootable. The you can choose from:<BR /><BR />Bios disable (4gb) (default)<BR />Bios enable (8gb)<BR /><BR />The problem i'm encounting is that I can't use tab, coz then my system freezes, so, i'm wondering if there is another way of doing this?<BR /><BR />Best regards,<BR />Mathias Thu, 13 Oct 2005 20:36:50 GMT Puppetfreek 2005-10-13T20:36:50Z https://community.hpe.com/t5/disk-enclosures/bootable-raid0-with-smart-array-5300/m-p/3649278#M18103 Hi (again!),<BR /><BR />I know that coz my system isn't a Proliant all thing doesn't work as it should.<BR /><BR />When you add a new array from the bios-meny (when you have pressed F8 during boot-up), you can choose from different kinds of raid etc. One of the choices avaible there is "Maximum Boot Partition" which I guess makes my drive bootable. The you can choose from:<BR /><BR />Bios disable (4gb) (default)<BR />Bios enable (8gb)<BR /><BR />The problem i'm encounting is that I can't use tab, coz then my system freezes, so, i'm wondering if there is another way of doing this?<BR /><BR />Best regards,<BR />Mathias Thu, 13 Oct 2005 20:36:50 GMT https://community.hpe.com/t5/disk-enclosures/bootable-raid0-with-smart-array-5300/m-p/3649278#M18103 Puppetfreek 2005-10-13T20:36:50Z