https://community.hpe.com/t5/disk-enclosures/expanding-array-using-smart-array-5300/m-p/3652271#M18145 Yes this drive was tested good in another system. This drive also works fine in any other slot in my hotswap other than ID2 Tue, 18 Oct 2005 17:48:10 GMT Daniel Hatter 2005-10-18T17:48:10Z https://community.hpe.com/t5/disk-enclosures/expanding-array-using-smart-array-5300/m-p/3652269#M18143 One of my drives went down over the past few days and after replacing it the RAID failed to rebuild. I am using Raid 5 across 3 18gb drives. The ACU still reports the HardDrive SCSI ID as failed with the new drive in place and I see no expansion or rebuild option in the ACU. The ACU does however show the new harddrives. I have a backup but don't want to mess around with it too much because its my webserver. Tue, 18 Oct 2005 16:42:57 GMT https://community.hpe.com/t5/disk-enclosures/expanding-array-using-smart-array-5300/m-p/3652269#M18143 Daniel Hatter 2005-10-18T16:42:57Z https://community.hpe.com/t5/disk-enclosures/expanding-array-using-smart-array-5300/m-p/3652270#M18144 Daniel:<BR /><BR />What this a drive that was in another system? or just a standby on the shelf?<BR /><BR />Do you have another one to swap?<BR /><BR /><BR />Steven Tue, 18 Oct 2005 16:59:24 GMT https://community.hpe.com/t5/disk-enclosures/expanding-array-using-smart-array-5300/m-p/3652270#M18144 Steven Clementi 2005-10-18T16:59:24Z https://community.hpe.com/t5/disk-enclosures/expanding-array-using-smart-array-5300/m-p/3652271#M18145 Yes this drive was tested good in another system. This drive also works fine in any other slot in my hotswap other than ID2 Tue, 18 Oct 2005 17:48:10 GMT https://community.hpe.com/t5/disk-enclosures/expanding-array-using-smart-array-5300/m-p/3652271#M18145 Daniel Hatter 2005-10-18T17:48:10Z