https://community.hpe.com/t5/disk-enclosures/raid5-cannot-start-autorecovery/m-p/3655840#M18201 Hi All ,<BR /><BR />Our Configuration ;<BR />I have HP Proliant DL380, which have Quad Channel Smart Array 6400 Controller. MSA30 Dual Bus Enclosure is conected to that server. There is a RAID5 set on MSA30, it contains 146 GB Hard Disks.<BR /><BR />Problem ;<BR />One of the 146 GB Hard disks was failed in RAID5 set. We changed the failed disk with a new one ( same capacity,same speed and smae slot )but controller cannot start auto-recovery. When I go to ACU I see the new disk as off-line and ready to be added to any RAID set. Controller has still 1787 Error Code, means "Drive Array Interim Recovery Mode The following drive should be replaced etc...".<BR />As far as I know, the RAID Controller must detect the replaced disk and immediately start the recovery process.<BR />How can we solve the problem ? Mon, 24 Oct 2005 03:01:22 GMT Omer Asik 2005-10-24T03:01:22Z https://community.hpe.com/t5/disk-enclosures/raid5-cannot-start-autorecovery/m-p/3655840#M18201 Hi All ,<BR /><BR />Our Configuration ;<BR />I have HP Proliant DL380, which have Quad Channel Smart Array 6400 Controller. MSA30 Dual Bus Enclosure is conected to that server. There is a RAID5 set on MSA30, it contains 146 GB Hard Disks.<BR /><BR />Problem ;<BR />One of the 146 GB Hard disks was failed in RAID5 set. We changed the failed disk with a new one ( same capacity,same speed and smae slot )but controller cannot start auto-recovery. When I go to ACU I see the new disk as off-line and ready to be added to any RAID set. Controller has still 1787 Error Code, means "Drive Array Interim Recovery Mode The following drive should be replaced etc...".<BR />As far as I know, the RAID Controller must detect the replaced disk and immediately start the recovery process.<BR />How can we solve the problem ? Mon, 24 Oct 2005 03:01:22 GMT https://community.hpe.com/t5/disk-enclosures/raid5-cannot-start-autorecovery/m-p/3655840#M18201 Omer Asik 2005-10-24T03:01:22Z https://community.hpe.com/t5/disk-enclosures/raid5-cannot-start-autorecovery/m-p/3655841#M18202 Could it be that Autorecover is set to Disabled? Select the New drive and Rebuild manually Tue, 25 Oct 2005 10:17:28 GMT https://community.hpe.com/t5/disk-enclosures/raid5-cannot-start-autorecovery/m-p/3655841#M18202 e4services 2005-10-25T10:17:28Z