https://community.hpe.com/t5/disk-enclosures/netraid-3si-and-rack-storage-12/m-p/2525281#M1827 First of all make sure the bios versions for the 3Si na dthe servers are up to date.<BR />Make sure that tha external cables you are using are one of the following:<BR />D6982A 5 meters<BR />D6983 10 meters<BR />-Althuogh I do not believe this 3Si is supported on the E800 ,I may be wrong so check the manual of the 3si.<BR />if it is supported MAKE very sure that it is installed on slot 3 or 4 on the PCI slots.<BR />Best of luck Mon, 21 May 2001 08:06:08 GMT RAMY NAGUIB 2001-05-21T08:06:08Z https://community.hpe.com/t5/disk-enclosures/netraid-3si-and-rack-storage-12/m-p/2525280#M1826 Hi There,<BR />I have an E800 server with a NetRaid 3si card in it. Attached to the 3si is a Rack Storage 12 unit. The LED on the 3si card is flashing red, and the LED on the Rack Storage 12 is flashing red. <BR />If I reboot the server, all LEDs will turn green for a period of time, and then they will eventually begin flashing RED again. My drives all appear to be fine. Their LEDs are all solid green.<BR />My OS is NT4.0. SP6. Latest drivers are loaded.<BR /><BR />Any ideas? Thanks in advance. Sat, 05 May 2001 15:25:37 GMT https://community.hpe.com/t5/disk-enclosures/netraid-3si-and-rack-storage-12/m-p/2525280#M1826 Corey_5 2001-05-05T15:25:37Z https://community.hpe.com/t5/disk-enclosures/netraid-3si-and-rack-storage-12/m-p/2525281#M1827 First of all make sure the bios versions for the 3Si na dthe servers are up to date.<BR />Make sure that tha external cables you are using are one of the following:<BR />D6982A 5 meters<BR />D6983 10 meters<BR />-Althuogh I do not believe this 3Si is supported on the E800 ,I may be wrong so check the manual of the 3si.<BR />if it is supported MAKE very sure that it is installed on slot 3 or 4 on the PCI slots.<BR />Best of luck Mon, 21 May 2001 08:06:08 GMT https://community.hpe.com/t5/disk-enclosures/netraid-3si-and-rack-storage-12/m-p/2525281#M1827 RAMY NAGUIB 2001-05-21T08:06:08Z