https://community.hpe.com/t5/disk-enclosures/netraid-1si/m-p/2525593#M1843 I strongly beleive nothing is wrong with the card ,But the HD's may be the problem.<BR />Are you sure these are HP HD ??<BR />Update the bios for the HD ,some drives have mismatch version that conflicts with the Raid controller.<BR />Best of Luck Mon, 21 May 2001 08:09:43 GMT RAMY NAGUIB 2001-05-21T08:09:43Z https://community.hpe.com/t5/disk-enclosures/netraid-1si/m-p/2525592#M1842 I have a Netserver E800 with a Netraid 1si card. Problem: the netraid card loses the physical drive arrangement settings. The NVRAM maintains the correct settings. Every time I need to reboot (prototyping web site), I have to play with the Netraid bios settings. I have upgraded the bios on both the card and the E800 server. The drives test fine - all are less than 3 mo's old.<BR /><BR />I am running NT4 sp5 (vendor's recommendation).<BR /><BR />Any ideas - please?? I am about ready to pull the card out.<BR /><BR />Thanks. Mon, 07 May 2001 14:18:45 GMT https://community.hpe.com/t5/disk-enclosures/netraid-1si/m-p/2525592#M1842 Robert Gearhart 2001-05-07T14:18:45Z https://community.hpe.com/t5/disk-enclosures/netraid-1si/m-p/2525593#M1843 I strongly beleive nothing is wrong with the card ,But the HD's may be the problem.<BR />Are you sure these are HP HD ??<BR />Update the bios for the HD ,some drives have mismatch version that conflicts with the Raid controller.<BR />Best of Luck Mon, 21 May 2001 08:09:43 GMT https://community.hpe.com/t5/disk-enclosures/netraid-1si/m-p/2525593#M1843 RAMY NAGUIB 2001-05-21T08:09:43Z