topic sancopy incremental in Disk Enclosures

sancopy incremental

Ehrler — Wed, 23 Nov 2005 18:21:03 GMT

Hello,
I have a EMC Question.
Is it possible to make an incremental sancopy.
HP-UX 11.11 / CX700
We have testet, but the changes from the source LUN are not on the destination LUN.???

Re: sancopy incremental

Devender Khatana — Wed, 23 Nov 2005 21:28:42 GMT

Hi,

What options are using for this?

In HP arrays we have a product called business copy XP to achive this. You will have to use EMC couterpart for this there.

HTH,
Devender

Re: sancopy incremental

Ehrler — Thu, 24 Nov 2005 14:46:11 GMT

I mean we have a config Problem.
In the Doku (EMC)I have found we must config a reserved lun to do a incremental sancopy. The Integrator mean, make a snapview and then the sancopy from snapview. ???
Regards
Ehrler

Re: sancopy incremental

Chris Callihan_1 — Sun, 27 Nov 2005 20:57:42 GMT

are both the source and destination arrays CX700's? are you mounting the destination copy to a host, or just letting it sit idle as a DR copy?

Re: sancopy incremental

Ehrler — Mon, 28 Nov 2005 14:14:45 GMT

Hello,

the source and the destination are both on CX700. (one Array)

The problem is, the source and the destination LUN are activ lun's.
From time to time the developer need a refresh from the source lun. With SANCOPY, the destination lun are not update correct with incremental SANCOPY.
The Integrater mean, the destination lun has no track-file to protocol the changes.
No way ??

Best regards
Ehrler