topic Monitoring MSA30 in Disk Enclosures

Monitoring MSA30

Ralf Buchhold — Fri, 09 Dec 2005 09:24:22 GMT

Hello
I want monitor my msa30 box. I use HPUX 11.23.
What must I do ? Can I use the EMU port ?
Thanks Ralf

Re: Monitoring MSA30

Sameer_Nirmal — Fri, 09 Dec 2005 22:48:28 GMT

Hi,

MSA30 could be managed & monitored by HP Insight Manager. You can download HP-UX version of HP SIM.

Refer following sites to get information.
http://h18000.www1.hp.com/products/quickspecs/11738_ca/11738_ca.HTML

http://h18013.www1.hp.com/products/servers/management/hpsim/index.html?jumpid=go/hpsim

EMU port could only be used for IPMI communication with an IPMI client. As you might be aware , EMU is used for environment monitoring like temp. power supply, fans. So with EMU port , it is only possible to monitor these environment entities only.

For complete monitoring and managing ( including environment entities ), HP SIM should be used.

Re: Monitoring MSA30

Andrew Merritt_2 — Tue, 13 Dec 2005 07:00:15 GMT

Ralf,
It depends what you mean by 'monitoring'. There is an EMS HW monitor that comes with OnlineDiags, msamon, that reports events for the MSA30.

See http://www.docs.hp.com/en/diag/ems/emd_msamon.htm and http://www.docs.hp.com/en/diag/ems/msamon.htm for more information as to whether this is what you want.

As always, you should look to have the latest OnlineDiags release and patch for that release installed.

The link to the OnlineDiags is:

http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6
191AAE

You can also go to http://www.software.hp.com and then type "B6191AAE" in the search box.
The latest patch for the current 11.23 release of OnlineDiags is PHSS_34034 .

Andrew

Re: Monitoring MSA30

Sยภเl Kย๓คг — Tue, 13 Dec 2005 07:23:04 GMT

Hi,

HP SIM will be a best suit for your purpose.

Regards,
Sunil

Re: Monitoring MSA30

Andrew Merritt_2 — Tue, 13 Dec 2005 08:21:59 GMT

I'm not sure what software exists that will integrate with HP-SIM and monitor the MSA-30, apart from the OnlineDiags, which will, with SysFaultMgmr, pass events to HP-SIM via WBEM.

Sunil, Sameer, what monitoring of the MSA 30 does the basic HP-SIM provide?

Andrew