https://community.hpe.com/t5/disk-enclosures/smart-array-642-windows-2003/m-p/3696688#M18877 I am using a Smart Array 642 in a DL380 running a MSA20 (with 12x250GB SATA disks), the ACU software (and the F8 setup utility [ORCA?]) are only allowing me to create a volume with a maximum size of 2TB.<BR /><BR />I was under the impression that this controller allowed larger volumes than this, the card is fully up to date firmware wise and as the limit occurs in F8 setup I don't see this as being a limit of the Operating System.<BR /><BR />Does this card support volumes greater than 2TB and if so how do I create one. Thu, 22 Dec 2005 07:06:26 GMT SinclairSpeccy 2005-12-22T07:06:26Z https://community.hpe.com/t5/disk-enclosures/smart-array-642-windows-2003/m-p/3696688#M18877 I am using a Smart Array 642 in a DL380 running a MSA20 (with 12x250GB SATA disks), the ACU software (and the F8 setup utility [ORCA?]) are only allowing me to create a volume with a maximum size of 2TB.<BR /><BR />I was under the impression that this controller allowed larger volumes than this, the card is fully up to date firmware wise and as the limit occurs in F8 setup I don't see this as being a limit of the Operating System.<BR /><BR />Does this card support volumes greater than 2TB and if so how do I create one. Thu, 22 Dec 2005 07:06:26 GMT https://community.hpe.com/t5/disk-enclosures/smart-array-642-windows-2003/m-p/3696688#M18877 SinclairSpeccy 2005-12-22T07:06:26Z