https://community.hpe.com/t5/disk-enclosures/sa641-configuration/m-p/3700911#M18955 During the configuration of an SA641 controller I get the option to enable or Disable MaxBoot. What will be the correct setting if the installed OS will be Windows 2003 Server<BR />Thanks Mon, 02 Jan 2006 10:58:15 GMT Christos Palaontas 2006-01-02T10:58:15Z https://community.hpe.com/t5/disk-enclosures/sa641-configuration/m-p/3700911#M18955 During the configuration of an SA641 controller I get the option to enable or Disable MaxBoot. What will be the correct setting if the installed OS will be Windows 2003 Server<BR />Thanks Mon, 02 Jan 2006 10:58:15 GMT https://community.hpe.com/t5/disk-enclosures/sa641-configuration/m-p/3700911#M18955 Christos Palaontas 2006-01-02T10:58:15Z https://community.hpe.com/t5/disk-enclosures/sa641-configuration/m-p/3700912#M18956 Christos:<BR /><BR />Use Disable MaxBoot for Windows 2003.<BR /><BR />When MaxBoot is enabled, 63 sectors are<BR />used per track instead of 32. This increased number of sectors allows a larger boot partition for<BR />operating systems such as Microsoft® Windows NT® 4.0 that use cylinders, heads, and sectors of a<BR />physical drive to determine the drive size. It also enables you to create a larger logical drive or<BR />increase the logical drive size (extend it) at a later time.<BR />Logical drive performance is likely to decrease with MaxBoot enabled.<BR /> Mon, 02 Jan 2006 20:01:20 GMT https://community.hpe.com/t5/disk-enclosures/sa641-configuration/m-p/3700912#M18956 Felipe Martinez 2006-01-02T20:01:20Z