topic Re: DL380 Server Expanding Array Raid 5 in Disk Enclosures

DL380 Server Expanding Array Raid 5

Chris Stevens_1 — Tue, 17 Jan 2006 12:29:43 GMT

Hi,

Just checking instructions for expanding the array for a DL380 and it seems simple. Is it as simple as plugging in new (same capacity) drives then extending the logical drive using ACU? Do I need to then use Diskpar.exe in Windows 2003 to make the new space available in the OS?

Re: DL380 Server Expanding Array Raid 5

Burg — Wed, 18 Jan 2006 08:49:48 GMT

yes, after you extend the drive in ACU. After that is done you can see under disk management that there is free space on you logical drive. Start diskpart and then select the volume you want to extend.
The last thing you have to do is use the command "extend" in diskpart.
It should take couple seconds to extend the volume under windows.

Re: DL380 Server Expanding Array Raid 5

Chris Stevens_1 — Wed, 18 Jan 2006 09:24:53 GMT

This will be the first time i've done this so a little nervous. The Server will be backed up, but I was wondering if anyone has gone through this process before and had any problems?

Regards

Chris

Re: DL380 Server Expanding Array Raid 5

Stephen Kebbell — Thu, 19 Jan 2006 10:37:26 GMT

Hi,

make sure you use DISKPART to extend the partition. DISKPAR is a different tool (Disk Realignment) and is data-destructive! OK, diskpart can destroy data as well if it's used incorrectly, but just make sure it's the correct disk number.
Also, you cannot use it on your boot partition.

Regards,
Stephen

Re: DL380 Server Expanding Array Raid 5

Ruslan — Fri, 20 Jan 2006 03:03:15 GMT

The last note about boot partition is very important. How many partitions on logical drive present now?

Re: DL380 Server Expanding Array Raid 5

Dave219td — Wed, 01 Mar 2006 13:07:05 GMT

Chris
How did the expansion go? I will be trying the same thing an a ML530 by adding 3 additional drives and want to expand the F:
drive that is used for Word and Excel files.