topic Re: MSA1000 Controller in Disk Enclosures

MSA1000 Controller

Louann Duchemin — Wed, 15 Mar 2006 12:07:18 GMT

Site had to power off all system components. Once power was restored, the the MSA1000 was powered up, it was discovered that the contollers has reset the Connection Profile back to factory default and the Unit_id's were also gone. The rest of the contoller configuration was still intact.

Has anyone heard of this happening before and if so what the cause was?

Re: MSA1000 Controller

Jefferson Humber — Wed, 15 Mar 2006 12:25:17 GMT

Louann,

This is a new one on me. What version of F/W are the controllers running ?

Re: MSA1000 Controller

Louann Duchemin — Wed, 15 Mar 2006 13:37:19 GMT

The version of firmware is 4.32.

Re: MSA1000 Controller

Nguyen Anh Tien — Wed, 15 Mar 2006 21:55:34 GMT

How about MSA' LED
WHat message is displayed in LCD

Re: MSA1000 Controller

Louann Duchemin — Thu, 16 Mar 2006 13:51:50 GMT

Well, unfortunatly nothing was noted down. The configuration pieces that were missing, became missing after a full power down. We have a second controfller that is in standby mode, however no one thought to take a look at it either.

One item that we would like to know is where is the configuration setting stored? Is all of the information stored in that same location or seperate locations?