https://community.hpe.com/t5/disk-enclosures/array-controller-initializes-but-finds-no-drives/m-p/2536247#M2000 I have a brand new ML570 with three 18.2Gb drives. I am attempting to use Smart Start v4.90 to build the machine. The array controller initializes, then I get a message stating no drives are attatched to the controller. Then I am presented with two options: F1 to continue, and F10 to enter system configuration options. Both options request a bootable floppy and do not recognize the Smart Start CD. If I can't get to the BIOS, how can I boot from the cd... <BR /> <BR />Help! Mon, 04 Jun 2001 23:00:00 GMT Ayman Altounji 2001-06-04T23:00:00Z https://community.hpe.com/t5/disk-enclosures/array-controller-initializes-but-finds-no-drives/m-p/2536247#M2000 I have a brand new ML570 with three 18.2Gb drives. I am attempting to use Smart Start v4.90 to build the machine. The array controller initializes, then I get a message stating no drives are attatched to the controller. Then I am presented with two options: F1 to continue, and F10 to enter system configuration options. Both options request a bootable floppy and do not recognize the Smart Start CD. If I can't get to the BIOS, how can I boot from the cd... <BR /> <BR />Help! Mon, 04 Jun 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/array-controller-initializes-but-finds-no-drives/m-p/2536247#M2000 Ayman Altounji 2001-06-04T23:00:00Z