https://community.hpe.com/t5/disk-enclosures/hp-array-configuration-utility-v7-40-8-0/m-p/3771724#M20132 This screen is automatically displayed when running ACU for the first time. If you want to change these settings, select "Select hp array configuration utility" from the start menu<BR /><BR />The ACU user guide can be found @ <A href="http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00294139/c00294139.pdf" target="_blank">http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00294139/c00294139.pdf</A> Fri, 14 Apr 2006 05:38:06 GMT PVD 2006-04-14T05:38:06Z https://community.hpe.com/t5/disk-enclosures/hp-array-configuration-utility-v7-40-8-0/m-p/3771723#M20131 Hello -<BR /><BR />When this utility is initially installed the user is given an option to select Local Application Mode or Remote Service Mode. I would like to remove this selection and have the default (Local Application Mode) chosen. Is there a way to eliminate this opening selection screen?<BR /><BR />Thanks in advance for any assistance. Thu, 13 Apr 2006 14:01:32 GMT https://community.hpe.com/t5/disk-enclosures/hp-array-configuration-utility-v7-40-8-0/m-p/3771723#M20131 Richard Zeigler 2006-04-13T14:01:32Z https://community.hpe.com/t5/disk-enclosures/hp-array-configuration-utility-v7-40-8-0/m-p/3771724#M20132 This screen is automatically displayed when running ACU for the first time. If you want to change these settings, select "Select hp array configuration utility" from the start menu<BR /><BR />The ACU user guide can be found @ <A href="http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00294139/c00294139.pdf" target="_blank">http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00294139/c00294139.pdf</A> Fri, 14 Apr 2006 05:38:06 GMT https://community.hpe.com/t5/disk-enclosures/hp-array-configuration-utility-v7-40-8-0/m-p/3771724#M20132 PVD 2006-04-14T05:38:06Z