https://community.hpe.com/t5/disk-enclosures/hot-plug-20-40gb-dat-in-array/m-p/2537466#M2023 I have a Proliant ML370 with 4 drives in a raid 5 array on the Smart-5300 controller as well as a "Universal Hot Plug Tape Drive (20/40Gb)" in the array. Is this DAT supported under SCO Openserver? I have not seen any documentation regarding this combination other than the downloads listed at: <A href="http://www.compaq.com/products/storageworks/smartarray-controllers/SA5300enhanced.html" target="_blank">http://www.compaq.com/products/storageworks/smartarray-controllers/SA5300enhanced.html</A> (to add hot plug tape support for win2k, nt, and netware). Wed, 06 Jun 2001 23:00:00 GMT Ayman Altounji 2001-06-06T23:00:00Z https://community.hpe.com/t5/disk-enclosures/hot-plug-20-40gb-dat-in-array/m-p/2537466#M2023 I have a Proliant ML370 with 4 drives in a raid 5 array on the Smart-5300 controller as well as a "Universal Hot Plug Tape Drive (20/40Gb)" in the array. Is this DAT supported under SCO Openserver? I have not seen any documentation regarding this combination other than the downloads listed at: <A href="http://www.compaq.com/products/storageworks/smartarray-controllers/SA5300enhanced.html" target="_blank">http://www.compaq.com/products/storageworks/smartarray-controllers/SA5300enhanced.html</A> (to add hot plug tape support for win2k, nt, and netware). Wed, 06 Jun 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/hot-plug-20-40gb-dat-in-array/m-p/2537466#M2023 Ayman Altounji 2001-06-06T23:00:00Z