https://community.hpe.com/t5/disk-enclosures/adding-second-hvd10-jbod/m-p/3780968#M20253 You need to configure split bus. So you can daisy chain a half HVD10 to another half box.<BR /><BR />This link is yours:<BR /><BR /><A href="http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpg28482/lpg28482.pdf" target="_blank">http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpg28482/lpg28482.pdf</A><BR /><BR />HP Surestore E disk system HVD10 - User and Service Guide Tue, 02 May 2006 10:52:13 GMT Torsten. 2006-05-02T10:52:13Z https://community.hpe.com/t5/disk-enclosures/adding-second-hvd10-jbod/m-p/3780967#M20252 All,<BR /><BR />We currently have one HVD10 JBOD and we want to add a second.<BR /><BR />I have two controllers on my server that presently goes from port a on the controller to port a on the back of the jobd and same for B.<BR /><BR />DIP switches are set as follows: 1 off (down) 2-5 on (UP)<BR /><BR />If I want to daisy chain my second JBOD, do I just continue Port a on HVD 1 to Port A on HVD2? and terminate on HVD 2?<BR /><BR />Do I also set the dip switches the same or differently?<BR /><BR />Thanks. Tue, 02 May 2006 10:33:08 GMT https://community.hpe.com/t5/disk-enclosures/adding-second-hvd10-jbod/m-p/3780967#M20252 Nick D'Angelo 2006-05-02T10:33:08Z https://community.hpe.com/t5/disk-enclosures/adding-second-hvd10-jbod/m-p/3780968#M20253 You need to configure split bus. So you can daisy chain a half HVD10 to another half box.<BR /><BR />This link is yours:<BR /><BR /><A href="http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpg28482/lpg28482.pdf" target="_blank">http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpg28482/lpg28482.pdf</A><BR /><BR />HP Surestore E disk system HVD10 - User and Service Guide Tue, 02 May 2006 10:52:13 GMT https://community.hpe.com/t5/disk-enclosures/adding-second-hvd10-jbod/m-p/3780968#M20253 Torsten. 2006-05-02T10:52:13Z