topic Re: Secure Manager question in Disk Enclosures

Secure Manager question

Richard Murden — Mon, 15 May 2006 13:32:34 GMT

On the host where i am going to administer the VA, i do the following command:
[rpn0:/]#armdsp -i

Product ID: HP-A6218A
Device Type: Virtual Disk Array
Alias: va7410-2
World Wide Name: 50060b000014e9df
Unique ID: HPA6218A00SG230J0239
Serial Number: 00SG230J0239
Management Path: sdc9026.com:/dev/rscsi/c12t0d0

Why does the management path reflect the old hostname of sdc9026 when it should be rpn0? How do i correct this? I am running HPUX 11.11
Thanks,
Richard

Re: Secure Manager question

Prashant Zanwar_4 — Mon, 15 May 2006 14:40:56 GMT

Could be that, the array was used with other host & this particular LUN was actively used there.. Some config still reflects that..
It has to be changed..

Prashant

Re: Secure Manager question

Richard Murden — Mon, 15 May 2006 15:14:56 GMT

how do i change the information?
Thanks,
Richard

Re: Secure Manager question

Prashant Zanwar_4 — Tue, 16 May 2006 13:11:17 GMT

I am not much in array side config, might be you need to get in array manual and try some tricks..
Prashant