topic Re: Error Deleting Lun in Disk Enclosures

Error Deleting Lun

Darren Murray — Fri, 22 Jun 2001 02:26:12 GMT

Error in command execution, "RMT_AM60ERRORSTATUS_MSG"

AM60ERR : ERR_COMMAND_FAILED
AM60ERR QUAL : DELETE_LUN
MODULE_CODE_ID : SUBSYSTEM COMMAND STATE : A device error was returned
DEVICE ACCESS STATUS: SCSI Device Lock Not Granted

amcfg: Error in command execution

Re: Error Deleting Lun

Bill McNAMARA_1 — Fri, 22 Jun 2001 06:08:45 GMT

Issue an
amdsp -a
and post it up here.

Later,
Bill

Re: Error Deleting Lun

Insu Kim — Sun, 24 Jun 2001 11:40:38 GMT

This can happen when AM60Srvr is not running.
Try to issue "ps -ef|grep AM60" to see whether it's running or not.
If not, invoke it by either typing /opt/hparray/bin/AM60Srvr or executing /sbin/init.d/hparamgr start.

This also can happen when FC60 is not in a good condition.
Execute "amdsp -a " to see if FC60 operates well.

And finally, you'd better place a support call to HP to get some assistance because HP announced some important service notes for FC60.
Based on experience, applying for FC60 service notes were very helpful for many problems.

I hope this helps,